Westmore FX Silicone Adhesive Remover
Silicone Adhesive system is a highly effective prosthetic adhesive used in both the special effects and cosmetic industries. It is safe and fully compliant under both US and European cosmetic regulations.
Previously known as Underground Industries
Original price
$18.00
-
Original price
$32.00
Original price
$18.00
$18.00
-
$32.00
Current price
$18.00
Availability:
In stock
Availability:
In stock
This Silicone Adhesive Remover safely breaks down our adhesive, leaves little to no residue behind. Methyl Acetate and Ethyl Acetate free for a low odor user experience.
DIRECTIONS: Preparing surfaces- Appliance surface: Make sure appliance is clean, dry and free of debris.
- Skin surface: Thoroughly clean skin with either alcohol or Underground Industries™ Adhesive Prep (for maximum adhesion). Allow to dry completely.
- Apply a thin layer of adhesive to the appliance.
- Apply a thin layer of adhesive to the skin.
- Attach appliance with gentle pressure.
- Works on hair as well!
- If adhesive becomes stringy or difficult to use, sparingly add Underground Industries™ Adhesive Thinner to achieve desired consistency.
- If more work time is desired, dip brush in adhesive thinner prior to dipping into adhesive.
- Using Underground Industries™ Silicone Adhesive Remover work around the edge of the appliance advancing slowly until adhesive begins to soften and edge lifts. Continue working until appliance is completely free.
- Residual adhesive may be removed with a sponge or towel and additional remover.
- VOCs
- Gluten
- GMOs
- BSE/TSEs
- Nanoparticles
Contains no CMR substances listed in Annex VI of Directive EC 1272/2008.
Free of allergens as per the 7th Amendment to the European Cosmetic Directive.
Compliant with EU Animal testing requirements
Free of Class 1, 2, 3 solvents under ICH Harmonized Tripartite Guidelines.
- Butyldiglycol (CAS# 112-34-5)
- Ethyldiglycol (CAS# 111-90-0)
- 2-Butoxyethanol (CAS# 111-76-2)
- Benzo(a)pyrene (CAS# 50-32-8)
- Fluoranthene (CAS# 206-44-0)
- Benzo(b)fluoranthene (CAS# 205-99-2)
- Benzo(k)fluoranthene (CAS# 207-08-9)
- Benzo(ghi)perylene (CAS# 191-24-2)
- Indeno(1,2,3-cd)pyrene (CAS# 193-39-5)
- Dichloromethane/Methylene Chloride (CAS# 75-09-2)
- Trichloroethylene (CAS# 79-01-6)
- Tetrachloroethylene/Perchloroethylene (CAS# 127-18-4)
- For external use only.
- DO NOT get in eyes.
- If irritation occurs discontinue use.
- Heavy inhalation of vapors may cause drowsiness.
- Heavy Inhalation of vapors could irritate nose and throat.
- Keep tightly sealed when not in use.
- Keep out of reach of children.
- Store below 80°F (27°C)