One of our most popular clay modeling armature wires, the 907B sculpture wire is ideal for pieces up to 15". It is non-corrosive, lightweight and fully pliable yet strong and sturdy. 10 gauge (SWG); 1/8" in diameter; 20 feet long. Weight and length is approximate.
WARNING: This product can expose you to chemicals including Lead, Nickel, which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Approximate measurements: gauge (SWG); 1/8" in diameter; 20 feet long.
As an addition, you may want to consider our hand-made armatures for the head, head-bust and/or figure.
If using moist (ceramic/pottery) clay, please note, the armature wire cannot be put in a kiln during firing. The clay will shrink but the wire will not, resulting in cracking and/or breakage. We suggest using a wet and twisted newspaper armature as the paper will burn off during firing; or a wax armature as the wax will melt during firing.